Examinando por Autor "Serrano, F."

Mostrando 1 - 4 de 4

Acceso Abierto
Mars environmental networks through the MarsConnect microprobes
(Europlanet, 2025-01-23) Arruego, Ignacio; Apéstigue, Víctor; Bastide, L.; Azcue, J.; Gonzalo Melchor, Alejandro; Martínez Oter, J.; Caballero, N.; Liaño, G.; Torres, J.; González Guerrero, M.; Serrano, F.; De Mingo, J. R.; Rivas, J.; Andrés Santiuste, N.; Carrasco, I.; Fernández, M.; Reina, M.; Ruiz Carrasco, J. R.; Poyatos Martínez, David; Scaccabarozzi, D.; Frövel, M.; De la Torre, M. A.; Martín, S.; Pedraza, R.
In the last 15 years the Payloads Department of INTA has developed a variety of compact sensors for different Mars exploration missions. This includes a magnetometer (72 g), a dust sensor (35 g; with UC3M, Spain) and a radiometer (114 g) for the MetNet penetrator [1]; a radiometer (25 g optical head, 56 g processor) for DREAMS (Schiaparelli) [2], [3]; a radiometer plus camera (1 kg) for MEDA on Perseverance [4], [5]; a 110 g dust sensor (with UC3M, Spain) [6] and a radiometer plus spectrometer (180 g) for the METEO package [7] on Kazachock lander (ExoMars’22) and a 0.5 kg nephelometer (with INAF and Politecnico di Milano, Italy) [8] for the Dust Complex on the same lander. Equally miniaturized sensors exist for the measurement of the most relevant environmental variables, such as radiative balance, air temperature, wind, humidity, pressure, dust saltation, electric field, etc. with enough flight heritage (or technology readiness level) on the same sensors’ suites on Perseverance and ExoMars, as well as Insight or Curiosity before [9]. In summary, a large portfolio of miniature sensors for environmental research is available at present. However, a qualitative leap on (in-situ) Mars climate science will only happen through the deployment of networks of environmental stations throughout large areas of the planet. Given the relevance of these measurement not only from a scientific point of view but also because of their importance for future human missions to Mars, this is an objective considered in several Mars exploration roadmaps such as ESA’s Terrae Novae 2030+ [10]. With this aim, we propose a microprobe named MarsConnect. It consists of a 10-12 kg probe with a rigid, deployable aeroshell/TPS and a 5-6 kg impactor/penetrator carrying up to 1 kg of environmental sensors. Many of these probes could be launched to Mars with a single carrier, to deploy meteorological networks. This works inherits different concepts from previous similar proposals, very specially MetNet and MiniPINS [11], but simplifying even more the EDL concept and reducing the mass, at the expense of an increased impact speed. The probe’s aeroshell is divided into a backshell and two halves of a frontshield that are opened in the low supersonic regime to drop the penetrator. This one is equipped with a drag-skirt that provides some braking and increases stability. The expected impact speed, highly dependent on the atmospheric density profile, entry conditions and landing altitude, ranges from less than 100 to 140 m/s. The whole system is designed to be compatible with a wide range of scenarios and landing sites and is sized to endure more than one Martian year operating on the planet’s surface.
Acceso Abierto
Radiation and Dust Sensor for Mars Environmental Dynamic Analyzer Onboard M2020 Rover
(Multidisciplinary Digital Publishing Institute (MDPI), 2022-04-10) Apéstigue, Víctor; Gonzalo Melchor, Alejandro; Jiménez Martín, Juan José; Boland, J.; Lemmon, M. T.; de Mingo Martín, José Ramón; García-Menéndez, Elisa; Rivas, J.; Azcue, J.; Bastide, L.; Andrés Santiuste, N.; Martínez Oter, J.; González Guerrero, M.; Martín-Ortega, Alberto; Toledo, D.; Álvarez Ríos, F. J.; Serrano, F.; Martín Vodopivec, B.; Manzano, Javier; López Heredero, R.; Carrasco, I.; Aparicio, S.; Carretero, Á.; MacDonald, D. R.; Moore, L. B.; Alcacera Gil, María Ángeles; Fernández Viguri, J. A.; Martín, I.; Yela González, Margarita; Álvarez, Maite; Manzano, Paula; Martín, J. A.; del Hoyo Gordillo, Juan Carlos; Reina, M.; Urquí, R.; Rodríguez Manfredi, J. A.; De la Torre Juárez, M.; Hernández, Christina; Córdoba, Elizabeth; Leiter, R.; Thompson, Art; Madsen, Soren N.; Smith, Michael D.; Viúdez Moreiras, Daniel; Saiz López, A.; Sánchez Lavega, Agustín; Gómez Martín, L.; Martínez, Germán M.; Gómez Elvira, J.; Arruego, Ignacio; Instituto Nacional de Técnica Aeroespacial (INTA); Comunidad de Madrid; Gobierno Vasco; Ministerio de Economía y Competitividad (MINECO); Agencia Estatal de Investigación (AEI); National Aeronautics and Space Administration (NASA)
The Radiation and Dust Sensor is one of six sensors of the Mars Environmental Dynamics Analyzer onboard the Perseverance rover from the Mars 2020 NASA mission. Its primary goal is to characterize the airbone dust in the Mars atmosphere, inferring its concentration, shape and optical properties. Thanks to its geometry, the sensor will be capable of studying dust-lifting processes with a high temporal resolution and high spatial coverage. Thanks to its multiwavelength design, it will characterize the solar spectrum from Mars’ surface. The present work describes the sensor design from the scientific and technical requirements, the qualification processes to demonstrate its endurance on Mars’ surface, the calibration activities to demonstrate its performance, and its validation campaign in a representative Mars analog. As a result of this process, we obtained a very compact sensor, fully digital, with a mass below 1 kg and exceptional power consumption and data budget features.
Acceso Abierto
The UMR: Uranus Multi-Experiment Radiometer for Haze and Clouds Characterization
(Europlanet, 2024-07-03) Apéstigue, Víctor; Toledo, D.; Arruego, Ignacio; Irwin, P.; Rannou, P.; Gonzalo Melchor, Alejandro; Martínez Oter, J.; Ceballos Cáceres, J.; Azcue, J.; Jiménez Martín, Juan José; De Mingo, J. R.; Serrano, F.; Nuñez, J.; Andrés, S.; Torres Redondo, J.; Martín Ortega, A.; Yela González, Margarita; Sorribas, M.; Sebastián, E.; Vázquez García de la Vega, D.; Espejo, S.; Ragel, A.
The present understanding of Uranus and Neptune has been derived primarily from terrestrial observations and observations conducted using space telescopes. Furthermore, a brief flyby conducted by the Voyager 2 spacecraft nearly three decades ago has contributed to our knowledge of these celestial bodies. Recently, the Decadal Survey [1] has identified a mission to Uranus as a high-priority objective for NASA's space exploration program and its ongoing missions to Mars and Europa. The main mission study [2] establishes the scientific priorities for an orbiter, including analyzing the planet's bulk composition and internal structure, magnetic field, atmosphere circulation, rings, and satellite system. On the other hand, the mission includes a descent probe, whose primary mission is obtaining data on the atmospheric noble gas abundances, noble gas isotope ratios, and thermal structure using a mass spectrometer and a meteorological package. Investigation of the vertically distributed aerosols (hazes and clouds) and their microphysical and scattering properties is required to comprehend the thermal structure and dynamics of Uranus' atmosphere. These aerosols play a crucial role in the absorption and reflection of solar radiation, which directly influences the planet’s energy balance. In this work, we present a lightweight radiometer instrument [3] to be included in the descent probe for studying the aerosols in the first km of the Uranus’ atmosphere. The UMR, the Uranus Multi-experiment Radiometer, takes its heritage from previous missions for Mars exploration [4-6], where its technology, including mixed-signal ASICs radiation hardened by design [7-8], has demonstrated its endurance for extreme environments of operation, using limited resources in terms of power consumption, mass and volume footprints, and data budget. These characteristics make this instrument a valuable probe’s payload for studying Uranus’ atmosphere with a high scientific return. In this contribution, we will present the actual design of the instrument and the future perspective before a possible announcement of opportunity.
Acceso Abierto
Using the Perseverance MEDA-RDS to identify and track dust devils and dust-lifting gust fronts
(Frontiers, 2023-10-11) Toledo, D.; Apéstigue, Víctor; Martínez Oter, J.; Franchi, Fulvio; Serrano, F.; Yela González, Margarita; De la Torre Juárez, M.; Rodríguez Manfredi, J. A.; Arruego, Ignacio; European Commission (EC); Agencia Estatal de Investigación (AEI); Ministerio de Economía y Competitividad (MINECO)
In the framework of the Europlanet 2024 Research Infrastructure Transnational Access programme, a terrestrial field campaign was conducted from 29 September to 6 October 2021 in Makgadikgadi Salt Pans (Botswana). The main goal of the campaign was to study in situ the impact of the dust devils (DDs) on the observations made by the radiometer Radiation and Dust Sensor (RDS), which is part of the Mars Environmental Dynamics Analyzer instrument, on board NASA’s Mars 2020 Perseverance rover. Several DDs and dust lifting events caused by non-vortex wind gusts were detected using the RDS, and the different impacts of these events were analyzed in the observations. DD diameter, advection velocity, and trajectory were derived from the RDS observations, and then, panoramic videos of such events were used to validate these results. The instrument signal variations produced by dust lifting (by vortices or wind gusts) in Makgadikgadi Pans are similar to those observed on Mars with the RDS, showing the potential of this location as a Martian DD analog.